Eonfusion on Windows 7 hardware dongle workaround - Installation - Using Eonfusion

Not logged in - Login | Register

Eonfusion forum > Using Eonfusion > Installation > Eonfusion on Windows 7 hardware dongle workaround

-> Eonfusion web site
-> Eonfusion manual

Eonfusion on Windows 7 hardware dongle workaround

Moderated by: Mathew Woods, forumadmin

New Topic

Author

Post

Mathew Woods
Internal

Joined:	Tue Nov 18th, 2008
Location:	Hobart, Tasmania, Australia
Posts:	6
Status:	Offline
Mana:

Posted: Fri Jun 19th, 2009 07:22 am

Quote

Eonfusion is not fully compatible with Windows 7 after initial installation and will not run.

A workaround is available to run Eonfusion 1.2 - 2.0 on Windows 7 if you have a hardware dongle by following the steps below:

Install Eonfusion
Download the latest Hasp SRM driver
Available from here:
http://www.aladdin.com/hasp/contribute/discl.aspx?download=haspdinst.zip
Extract the haspdinst.exe
Run the exe via Command Prompt specifying the -install parameter.
e.g. >Haspdinst.exe -install
Insert the hardware dongle
Eonfusion will now work on Windows 7

Last edited on Wed Nov 18th, 2009 11:56 pm by Mathew Woods

Mathew Woods
Internal

Joined:	Tue Nov 18th, 2008
Location:	Hobart, Tasmania, Australia
Posts:	6
Status:	Offline
Mana:

Posted: Thu Nov 19th, 2009 05:28 am

Quote

The initial workaround above utilized a beta HASP SRM driver.

Aladdin have now release a final release driver:
HASP SRM Run-time Command-line Installation, version 5.75.

It is available from here:
http://www.aladdin.com/support/hasp-srm/enduser.aspx

Please note, you must have a fully licensed Hasp hardware dongle to use this workaround.

Cheers,
Mathew.

Last edited on Tue Dec 8th, 2009 10:14 pm by Mathew Woods

Mathew Woods
Internal

Joined:	Tue Nov 18th, 2008
Location:	Hobart, Tasmania, Australia
Posts:	6
Status:	Offline
Mana:

Posted: Tue Dec 8th, 2009 10:12 pm

Quote

Aladdin have now released a Windows 7 supported SRM driver install with a GUI.
HASP_SRM_Run-time_setup.zip

It is available from here:
http://www.aladdin.com/support/hasp-srm/enduser.aspx

(Again, this will only work with a fully licensed Hasp hardware dongle.)

Mathew Woods
Internal

Joined:	Tue Nov 18th, 2008
Location:	Hobart, Tasmania, Australia
Posts:	6
Status:	Offline
Mana:

Posted: Wed Jul 14th, 2010 06:40 am

Quote

Eonfusion 2.1 fully supports Windows 7 (both 32-bit and 64-bit) out of the box. Allowing for software locked licensing and hardware locked licensing options.

Cheers,
Mathew.

Current time is 08:58 am